The Splits tab contains settings for stations that have a Split setup:
Master IP / Hostname, Port | This is the hostname and port of the master machine that is acting as the controller for splits Tick Don't allow connection requests to prevent any split machines talking to this one. By default, the port is 7002 |
Data controller port Receive incoming commands | This is the port that PlayoutONE will open so that Data Controller can send commands to PlayoutONE By default, this port is set to 7003 and the option to Receive incoming commands is ticked, otherwise, Data Controller will be unable to talk to PlayoutONE |
Remote Command Dela | This is the delay between remote commands, we recommend setting this to 1 millisecond to remove any delay when processing them |
Max Clients | The maximum clients is the maximum amount of connections allowed to the machine, we recommend setting this to 15 |
Process incoming Split Commands | Enables the machine to process split commands that are sent to it by the master. |
Stretch Command Threshold | This is used in conjunction with STRETCH START and STRETCH END Markers and sets the maximum stretch % that is allowed. |
Surface password | This is the password that will be needed if you are connecting to PlayoutONE via the PlayoutONE Surface application |
Socket API Port TCP | See Socket API |
Socket API Port UDP | See Socket API |
HTTP Server Port | See HTTP API. Also used by WebVT® to communicate with the On-Air Machine. |
Multi Station ID | This is used if you are part of a Multi Station setup, this will have been preconfigured by the PlayoutONE Support team during your installation. |
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article